REFURBISHED ONLY: Jura Capresso S9, S8 & S7
Have you noticed that the Capresso C3000 and Jura S90 are virtually impossible to get? Well, there is a good reason. They have been replaced by the Jura Capresso S9, S8, and S7. They all look and operate similarly, but there are a few key differences. All of these machines give you three programmable single cup buttons plus two double cup buttons that are automatically adjusted. You can adjust the amount of coffee and water for each single cup button. The double cup button automatically doubles the coffee and the water amount of the single cup button to the left. The panel used for programming is discretely placed behind a door located near the bottom on the left side of the machine. Programming with these machines goes way beyond coffee and water amounts.
The S8 and S7 look just like the rest of family except the S8 is Platinum and the S7 is Black. Both of them have the same standard features mentioned above. Just like the other Jura/Capresso machines the Claris Water Filtration system and hot rinse cycle are available to help you maintain the machine. The “Dual-Frother-Plus” frothing attachment comes as the standard frothing device. It is very simple to use. There are two different positions. To get a good froth the wand is in the down position. To heat up and steam your milk you move it to the upper position. There has been mention of an automatic frothing system being available, but right now we don’t have pricing or availability information.