Hi,
The machine keeps asking to empty the drip tray repeatedly even though it is empty. I followed the suggestions posted but that didn't resolve the issue. Maybe I should test the micro switch now. Can you guide please?
I don't know if this is significant or not, but it all started after I was away for a week and the machine was turned off during that time. When I came back and turned it on it gave that message and keeps giving it even after emptying the dump box & tray repeatedly. After emptying it sometimes shows the message straight away. At other times I can brew one cup before the message shows up again.
Thank you.
I would like to chnage the suuport of the drip tray of my Saeco Talea Giro it's a manuel drip tray the support is connected to the machine Thank you
Rex Cotten
Reputation: 0
Followers: 0
Following: 0
The pucks are not coming out firm, they are runny and 'soupy'. There also seems to be allot of water in the drip tray for not many cups of coffee, I have tried adjusting the grind from one extreme to the other and no effect (not much adjustment either, comparred to other Saeco machines I've tried).
How do I use pre-ground coffee in this machine?
During the warm-up cycle, my machine suddenly goes silent, then there's a loud bang! The red exclamation point flashes. I've examined/lubricated and can manually manipulate the brew group components without difficulty.
FatBob
Reputation: 0
Followers: 0
Following: 0
Thanks, will try that! (would rather have strong coffee tho)
FatBob
Reputation: 0
Followers: 0
Following: 0
Hi
I've had my taleo giro 3 years now and had no problems with it, using it every day.
I'm now finding that the coffee is entering the drip tray as a mush of wet coffee grounds, instead of the 'puck' that it should be.
Also, I'm getting the 'empty now' warning very regularly, I've tried removing the drip tray for a minute while the machine is on, to no avail.
Please help!
mjackson ♦ Hansel,
Try unplugging for fifteen minutes. Then see if that helps. If not give our technical department a call.
09-07-2012 8:39am |