This is a one of a kind fully automatic commercial style espresso/cappuccino machine. The embossed copper and bronze is luxuriously finished with lacquer. When you look close you can see how the machine has been hand made by its Spanish craftsman. The eagle is removable or it can be turned to face any direction. This espresso machine has programmable coffee dispensing and can brew and steam at the same time. This makes it a perfect choice for home use, an office environment or even for a low vol
Can Expobar machines use espresso Pods? How do they compare to other semi-auto untis in the same price range? I have looked at so many yet I'm about as clear as mud. I'm an engineer so like what I've read, but just want a little better opinion from the experts who sell so many different types of machines.
0
Vote
I just have a question regarding my espresso machine. The coffee that comes out of the machine is not that hot. Is there anyway I can control the temperature? Or should I leave the machine switched on for longer period before I use it? I usually switch it on for 5 minutes, make a latte and switch it off.
0
Vote
Whole Latte Love Staff There are a few things that will help get your espresso hot. The first, which you mentioned, is letting the machine heat up a little longer before you use it. Make sure that the temperature ready light comes on before you try to use the machine. After the machine says its up to temperature, you’ll also want to run a "blank shot". This is simply activating the brew function while the empty portafilter is in place to allow hot water to come through the brew group and portafilter. In addition, you should preheat the cup you’ll be brewing into with hot water. Cold brew groups, portafilters, and cups will absorb the heat from your espresso, making it colder and reducing the amount of crema you get. Preheating all of these components prevents that from happening and helps you to get the perfect shot.
I have an expobar commercial machine which I purchased from you a couple of years ago and it leaks when the espresso is forced through.
0
Vote
Whole Latte Love Staff If you have a leak pouring over your portafilter during brewing, it leads me to believe that you need a new group-head gasket. You can purchase this part directly through us by calling us at 888-411-5282.
I have an Expobar Athenea Espresso Machine and the Eagle that goes on top broke its wing. Is there anyway to get a new topper?
0
Vote
Whole Latte Love Staff This part is available directly through us. Simply give us a call at 888-411-5282 and we’ll be able to send one out to you.
It has been taking longer to froth a pitcher of milk lately. A thermometer in a cup of water from the porta filter indicates only about 180 degrees. Do I need to increase the temperature and if so, how?
0
Vote
Whole Latte Love Staff The temperature of the water in your cup is fairly normal - although the machine brews at a higher temperature (around 200F), after its exposure to air and absorption of some of the heat from your cup, 180 is right on target, so I don’t think it’s a temperature issue. It sounds like you may simply need to give your steam tip a good cleaning. Just add a spoonfull of Cafiza (what you use to backflush) to a cup of hot water and let the steam tip soak for a while. As some preventative maintenance, after steaming your milk you should blow some additional steam out of the wand to ensure nothing is stuck in the wand. If you’ve tried this and are still experiencing problems, give us a call at 888-411-5282 so that we can more thoroughly diagnose the problem.
Whole Latte Love Staff To remove the shower screen on the Expobar, you’ll need to use a flat head screwdriver. Insert the flat side of the screwdriver on the right side of the group head, between the shower screen and brew group, and apply gentle pressure to start prying it out. Then do the same thing on the left side of the group head to prevent bending the screen. You can request a set of detailed instructions on cleaning the shower screen a brew group by calling us at 888-411-5282.
I have a problem with my espresso machine. When I try to turn it on, it immediately trips the GFI switch on the outlet. I occasionally have to reset an interior switch in the machine, but this is a different problem. Any suggestions? Thanks.
0
Vote
Whole Latte Love Staff If your machine is tripping your GFI switch, you may need to send it in for repair. Please call us at 888-411-5282 so that we can thoroughly diagnose the problem and provide you with the most appropriate solution.
I bought my Expobar from you about two years ago. Lately, I've noticed that when pulling a shot, water is leaking out where the portafilter meets the brew head. The only way to avoid this is to crank the portafilter in really hard to the right. Even so, the problem seems to be getting worse. Can this be fixed?
0
Vote
Whole Latte Love Staff It sounds like you simply need to replace the brew group gasket, which is generally necessary every year or so. Please contact us at 888-411-5282 so we can send you this part and instructions on how to replace it.
Should I be removing the filter basket every day from the portafilter for thorough cleaning? How do you easily do this given how secure it fits...is this what the stubby flat screwdriver i see mentioned is for?
0
Vote
Whole Latte Love Staff You don’t have to remove the filter basket every day for cleaning, but I would recommend rinsing and wiping the filter basket out every time you’ve knocked out your spent grounds. However, the filter basket should be removed every month or so for deeper cleaning. You can usually remove them with a fingernail, but a butterknife or flat screwdriver will do if it’s really snug - just be careful not to bend the basket with your force. Then simply add a teaspoon of Cafiza (what you use to backflush your machine) to a cup of hot water and let the filter baskets soak for 10 or 15 minutes. Also, hold the filter basket up to the light to see if any of the holes are clogged. If you do notice this, you can clean the holes out with a toothpick and then soak the baskets as recommended.
Whole Latte Love Staff This machine is meant for home use and is a great addition to any kitchen. The only thing you’ll want to make sure of is that it will fit where you want to put it, since it is fairly tall - it stands 30"H x 11"W x 14.5"D.
Monday - Thursday: 9am-8pm
Friday: 9am-6pm
Saturday: 10am-3pm
Sunday: 12pm - 5pm
Closed Memorial Day
Whole Latte Love - 2200 Brighton Henrietta Townline Rd, Rochester, NY 14623
Copyright ©2013 Whole Latte Love. All rights reserved.
Whole Latte Love Staff Expobar machines are not designed as pod machines, but it is possible to brew pods with them by using the Gaggia pod filter basket. Because of the high quality brewing components, Expobar machines are designed to make an excellent shot of espresso. This is best done by using your own freshly ground coffee rather than pods. Pods do offer added convenience when brewing, but with a highly capable machine like the Brewtus II, you will always get the best results if you can perfect the grind and tamp yourself.
04-13-2007 1:19pm |