Bezzera Matrix MN Dual Boiler Espresso Machine
Leap into the future with Bezzera’s newest addition. The Bezzera Matrix MN is a visionary dual boiler machine that boasts PID control over both the steam and hot water temperatures using a large touchscreen display. The Matrix will stand out in any modern kitchen with its wooden detailing, stainless steel front panel and customizable body color that adapts to any environment or taste. This sophisticated espresso machine regulates the water flowing into the Faema E61 group by a thermosiphon circulation system, which syphons water from the brew boiler into the grouphead.
The Matrix fuses cutting edge software and electronics with traditional lever operation and an E61 group. With a large 4 L reservoir and low water alerts, you can rest easy brewing and steaming several drinks; or, for easier operation, you can plumb this machine directly into a water line and never worry about filling the reservoir again. Should you choose reservoir operation, the Matrix has a water level sensor that can be calibrated to track your water volume at any given time.
The interface allows you to program a pre-infusion cycle to pre-wet the grounds before brewing, which helps you achieve a richer end result. Also programmable are automated on/off settings and backflush sequences, spent water filter and maintenance alarms, and a priority option which allows you to give priority heating to one of the boilers for a faster heat up time.
Dimensions: 12.2” W x 16.5” H x 18.5” D
An intuitive 3.5” full color touch display lets you check and change your temperature settings in a snap. The internal menu allows you to easily navigate between a wide variety of options such as wake up and sleep times.
Color Customizable Body Panels
Customize your machine’s look across the color spectrum with it’s lit up LED body panels. Select between 7 RGB combinations for a range of blue, green, red, and purple colors. You can also adjust the brightness of the panels.
Programmable On/Off Times
Using the programming menu, you can program automatic on/off times for every day of the week.
The Matrix MN makes it easy to keep track of any necessary maintenance by alerting you to change or recharge your water filter, rinse or back flush, and fill the reservoir.
Get a bold shot with fully saturated grounds. The programmable preinfusion cycle on the MN allows you program preinfusion times of up to 5 seconds (in 0.5 second increments) to pre-wet and swell the puck before brewing to extract all the oils and flavor possible.
Reservoir and Plummable
Choose your water source between a large 4L reservoir and plumbing the machine directly into a water line.
Dual PID Thermostats
The Matrix MN offers you total control over your espresso and milk based drinks with dual PID thermostats. You can regulate both the steam and brew water temperatures within a range of 190°F to 204°F (brew) and 212°F to 266°F (steam). Boiler priority can also be set to have the Matrix regularly alternate between boilers, or to prioritize the heating of one over the other.