Gaggia Babila: Cleaning, Calibrating and Replacing the Grinder

Have a clog in your Gaggia Babila grinder or need to calibrate or replace the grinder? This detailed video takes you start to finish through the process. Includes removing the outer case, grinder cleaning, grinder calibration installing a new grinder if needed and complete reassembly of the Babila.

---

Gaggia Babila How to Clean, Calibrate or Replace the Grinder

1. Introduction (00:00)
2. Preparation (00:25)
3. Remove Back Cover Panel (02:03)
4. Remove Trim Ring (03:08)
5. Remove Top Cover Panel (04:37)
6. Remove Rubber Cover (07:00)
7. Remove Top Burr (08:23)
8. Clean Grinding Chamber (09:22)
9. Clean Grind Chute (10:20)
10. Install Top Burr Plate (11:33)
11. Calibrate the Grinder (12:10)
12. How to Replace the Grinder (13:00)
13. Remove Wires on New Grinder (13:30)
14. Remove Old Grinder (14:40)
15. Remove Wires on Old Grinder (14:55)
16. Attach Wires to New Grinder (16:10)
17. Place New Grinder in Machine (17:36)
18. Rubber Cover Install (18:20)
19. Top Cover Install (19:45)
20. Grind Adjustment Knob (20:10)
21. Top Panel Mounting (20:52)
22. Trim Ring Install (22:05)
23. Board Cover Install (23:30)
24. Back Cover Install (24:00)