Gaggia Brera: Cleaning, Calibrating and Replacing the Grinder

Learn how to clean, calibrate, or replace a grinder in the Gaggia Brera.

If you're experiencing issues with your grinder such as a persistent "No Beans" alarm or coffee grinding but not making it to the brew unit, your grinder is most likely clogged and needs to be cleaned and recalibrated.

---

Gaggia Brera: How To Clean, Calibrate or Replace the Grinder

Associated Parts:

• Complete Grinder Assembly 120V
• Urnex SuperGrindz Super-Automatic Grinder Cleaner
• Pallo Coffeetool Brush

Failure of normal wear and tear items such as group gaskets, seals, and shower screens are not covered under warranty. Issues due to scale build-up or lack of maintenance are not covered.

1. Introduction & Prep (00:00)
2. Tools Required (00:45)
3. Remove Finger Guard (01:13)
4. Remove Bean Hopper (03:13)
5. Notate Grind Setting (04:15)
6. Remove Rubber Cover (05:04)
7. Replacing the Grinder (05:10)
8. Remove Wires from New Grinder (06:40)
9. Grinder Wiring (08:10)
10. Mounting New Grinder (09:30)
11. Grinder Cleaning and Calibration (10:47)
12. Remove Upper Burr Plate (11:13)
13. Cleaning the Grinder (11:45)
14. Install Upper Burr Plate (13:00)
15. Calibrating the Grinder (14:40)
16. Install Rubber Cover (15:15)
17. Install Hopper/Top Cover (16:00)
18. Install Finger Guard (18:45)