My expobar ofice lever got a dry boiler.Pump is working while I pul the brew lever up,but no water wil be filed into...

My expobar office lever got a dry boiler.Pump is working while I pull the brew lever up,but no water will be filled into the boiler.heating light goes for 1 second after the power switch on.How can I fix it ,it's not in US.
2 Answers
No-avatar
Have you tried removing the water softener filter to see if the machine has lost its prime? There should be a water filter on the end of one of the tubes in the water tank. Pull the filter off of the end of the tube and try again. The machine should start to draw in water. Worst case - the solenoid valve in the machine may have become stuck.
Was this answer helpful?
0
No-avatar
Finally, I found that's the problem on 1 of the 2 relays in side the control box.It can be held, but not signal was sent to active the pump.now It has been replaced by local mechanician. Techkathy thank for your help.
Was this answer helpful?
0