Mahlkonig K 30 Vario Espresso Grinder
The Mahlkonig K 30 Vario Espresso Grinder is a great choice for a commercial coffee service needing to brew 2 to 3 double shots of espresso per minute. It will maintain a consistent grind over thousands of operations and is easy to setup and maintain. You can grind 5000 shots before it needs cleaning. And 100,000 before the burrs need replacing. A simple locking knob and slider on the top of the casing allows for infinitely variable grind fineness. The 65mm steel grinding discs are belt driven by a powerful motor and provide very quick delivery of grinds into your portafilter. The receiver is adjustable to fit all sizes of portafilters. Its unique shape holds the portafilter steady allowing you to operate the grinder just by setting it in the receiver where it engages a switch that runs the motor.
Ground coffee loses more than half of its aroma within about 15 minutes due to oxygen, humidity and light dissolving the volatile aromas out of the broken cells. The whole bean protects the aroma inside the cells until grinding occurs. In order to minimize the aroma loss Grind-on-Demand-grinders only grind the amount of coffee beans that are needed for the shot. Dosing is done through a timer in the grinder’s software. Therefore Grind-on-Demand ensures constant quality in every cup and equal treatment for every customer because every dose for every cup is freshly ground. The K 30 Vario Espresso Grinder operates when a portafilter is engaged in the receiver allowing portion controlled fluffy fresh grounds for espresso to drop right into the portafilter.
Programmable Dose Control
The programmable controls provide easy adjustment of grind time to establish pre-sets for dose sizes or to bypass the pre-sets for manual dosing. Independent dosing pre-sets of single and double shot sizes can be saved in memory, one setting for each of the two buttons on the front of the body. Pre-setting the dose size is accomplished by setting grind-time with the twin push buttons and tuning knobs.
The controls also keep track of additional information including shot counters for single, double, barista, and life. It also has resettable alerts for cleaning and disc change.
With grind-on-demand and easy pre-setting of grind size and time for all kinds of portafilters the K 30 Vario Espresso Grinder provides hands-free operation. And the break-function and barista mode allows your inner barista to free-fill the portafilter by eye and tamp part-way through dosing.
The 65mm, (2.56 inches), Special Steel Alloy disc burrs will grind the most robust coffee bean with ease. They are very long life and rated for 100,000 doses before needing to be replaced. Depending on fineness setting they can grind 3.6g to 4.8g per second. That means they will grind an average single espresso dose in about 2 seconds.
The bean hopper has a whopping 3.3lb capacity and includes an integrated slider gate to close off the bottom when you need to remove the hopper with beans still in it.
A feature called the break-function allows you to interrupt the grind to do a partial tamp by just removing the portafilter. Returning the portafilter to the receiver continues the grind. The controller will remember how much grind time is remaining and show it on the LCD display. If you don’t want to continue the grind, the memory can be cleared by pressing the buttons.
Safety devices include a microswitch that senses correct mounting of the bean hopper and keeps the machine from running until the bean hopper is correctly seated and locked into position. A circuit breaker accessible on the rear of the housing protects the machine against external power surges. Foreign objects in the grind chamber are sensed by motor winding heat build-up and if the motor heats up significantly the machine will shut off. The grinder cannot be started again. Let it rest for about 30 minutes. The thermal switch will re-connect the motor automatically.
- 65 mm steel discs
- belt-drive motor
- MAHLKÖNIG Information and Control System (MICS)
- bean hopper with integrated hopper slider
- Electronically controlled (Timer)
- Universal Port-a-Filter Rests
- Shot Counter
- hands-free operation
- Hopper Capacity 3.3 lb
- Grinding Capacity 3.6 - 4.8 g/sec
- Voltage 100 -115 V
- Frequency / Phases 60 Hz / Single-Phase
- Grinding Disc Diameter 65 mm (2.56”)
- Rotations 1650 rpm
- Dimensions (w x d x h) 9.5“ x 12.6“ x 21.7“
- Net Weight 28.7 lbs
- Listings: UL, NSF
For those who desire a les automatic experience the machine can be put into barista mode. In this mode the timer for dosing is switched off and the motor is switched on or off by engaging the portafilter in the receiver.