Refurbished Rocket Espresso R58 Espresso MachineBy Rocket Espresso
Refurbished Rocket Espresso R58 Espresso MachineBy Rocket Espresso
Out of Stock $2,613.00
Cannot compare more than 5 products.Go to Compare
Free shipping on all orders over $50
Includes a 1-Year Limited Warranty
Call us at 585‑924‑7170
Or chat with us!
Incorporating feedback from their best customers, Rocket Espresso introduces the next iteration of their famous R58 espresso machine, the R58 V2. The Rocket Espresso R58 semi-automatic espresso machine created a stir among savvy consumers around the world in 2012, with its dual-boilers and dual PID temperature control sensors. Rocket Espresso has always used commercial components and technically meticulous construction and continues that tradition with the R58.
Connect the Rocket Espresso R58 directly into a plumbing water source or use the 2.5L reservoir with the flip of a switch. The advanced Rocket Espresso R58 also features an impressive electronic PID remote-control box, a very quiet iso-mounted rotary pump, and a commercial-grade Sirai pressure stat. The pump pressure can be adjusted externally, allowing you to fine-tune extraction rates.
World-class body construction incorporates stainless steel to ensure that this Rocket Espresso model will provide a lifetime of quality service. Users can expect excellent performance and quality drinks from the Rocket Espresso R58’s E-61 brew-group, super quiet rotary pump, and dual-boilers with long-life elements.
Features and Benefits: New to this Version
Based on responses to the original design, Rocket Espresso has made the following improvements to the V2:
- Upgraded Chassis - The chassis on the R58 has been reinforced for increased durability and now sports a set of nylon rails to allow the drip tray to fit perfectly.
- Magnetic Drip Tray Closure - The drip tray has been outfitted with magnets, preventing it from sliding around or rattling.
- Upgraded Control Board - The control board has been upgraded to prioritize power flow to the brew boiler to ensure temperature stability while brewing.
Features and Benefits: Brewing
Commercial E-61 Brew Group
The Rocket Espresso R58 has a professional quality nine-pound E-61 brew-group made of chrome plated marine brass to ensure proper heat stability. Espresso extraction is aided by a pre-infusion process to preserve coffee flavor and aroma. Hot water is constantly circulated between the boiler and brew-group to ensure proper brewing temperature. The R58 comes with a commercial portafilter as well as single and double-shot filter baskets.
The Rocket Espresso R58 has a dual pre-infusion system, consisting of a mechanical pre-infusion system with progressively working piston and a static pre-infusion chamber, resulting in consistent flavorful, aromatic, and crema-rich extractions.
Silent Rotary Pump
The Rocket Espresso R58 model has a quiet, commercial grade rotary pump with external pressure adjustment controls, allowing users to fine tune pump pressure while viewing the dedicated pressure gauge. The internal architecture of the machine is configured for best efficiency, reducing pump noise and creating a very quiet rotary pump machine. Coupled with the twin PID controls, dual boilers, and a Sirai commercial-grade pressure stat, it delivers superb temperature control and stability.
The Rocket Espresso R58 has two full, round manometer displays that allow users to easily monitor both pump and boiler pressure, to fully understand the extraction parameters.
The boiler and reservoir water levels are monitored by sensors that will alert the user if the machine needs to be refilled, and shut it off, if ignored. This feature helps to prevent a dry-boil and prolong the life of the machine.
Twin PID (Proportional-Integral-Derivative) controllers are located independently at the boilers to monitor and maintain boiler temperatures and can be set with an electronic remote-control box with digital display that plugs in via a cable to the side of the machine, thereby keeping the classic look of the R58 pristine without adding a digital LED interface to the polished front panel. The remote can also switch the hot water / steam boiler on or off, and switch between using the on-board water reservoir or the directly plumbed water supply.
The brewing boiler PID controls will maintain temperature with a deviation less than 1° Celsius. Rocket Espresso developed the R58 using Greg Scace’s temperature determination method for extraordinary accuracy. Subsequently you can tweak the temperature settings with confident precision for the particular coffee bean you are using and extract the maximum potential flavor from the coffee.
Dual Heavy-Duty Copper Boilers
The lead-free copper 0.58L brewing water boiler and the 1.7L hot water / steam boiler, which has thick brass end plates for increased heat retention, are wrapped in special thermal-insulating blanket material that provides increased temperature stability, resulting in greater energy efficiency. The overall boiler design optimizes the boiler-capacity to heater-power ratio, resulting in a very fast heat up time.
Both boilers have 1400W heating elements made from special long-life material (5 times longer life than normal elements). The boilers operate independently, turning on and off according to the needs of each. They can be on at the same time; however, even though they both have 1400W elements, when on together the boilers will not exceed a 1550W power consumption rate.
The electronic PID remote control can toggle the hot water / steam boiler on and off. This mode is useful for those who only drink espresso and do not need steam or hot water and want to conserve energy.
The commercial-grade chrome portafilter comes with single and double shot filters and baskets for your convenience.
The insulated copper boilers also heat the cup warmer located on top of the machine. Heat is released through holes in the top of the machine, ensuring that your cups are warmed. There is a hatch cover at the rear of the tray, allowing you to fill the water reservoir without removing it from the machine.
A dedicated control switch allows users to alternate between drawing water from the 2.5L reservoir or plumbed water lines. The large water reservoir is removable for easy refilling and maintenance.
Features and Benefits: Frothing & Hot Water
No-Burn Stainless Steel Steam Wand
Rocket Espresso’s patented cool-touch technology ensures that the steam wand is safe to use (only the nozzle gets hot). The heavy-duty wand has a two-hole tip and is engaged with a large ergonomic control knob at the top of the wand. Below the steam wand is the steam pressure gauge – the machine is at steaming pressure when the gauge measures around 1 bar. Use the steam knob to foam and steam milk, soy milk, or half and half for a cappuccino, latte, café breve, or latte macchiato.
Stainless Steel Hot Water Nozzle
The hot water nozzle is located to the right of the brew group and features another large, ergonomic control knob. You can dispense hot water for tea, a café Americano, instant soup or hot chocolate, drink mixes, or hot cider.
Features and Benefits: Cleaning, Maintenance, and Other
Water Sensor & Reservoir
The Rocket Espresso R58 comes equipped with an electronic microprocessor-controlled automatic low-water-level sensor that will automatically shut off the machine to prevent a dry boil. A warning system will also alert you when the water reservoir needs to be replenished. The water reservoir has a generous 84 oz capacity and can be filled in the machine through an access hatch at the rear of the cup warming area on top of the machine, or you can remove the reservoir and fill it at the tap.
Use a damp cloth to keep your brew group head free of excess grounds, and use a brush to clean the shower screen and group gasket on your brew-group. The portafilters’ metal filter-basket and filter handle can be cleaned in warm water and non-abrasive detergent to remove excess grounds and coffee oils. When the drip tray fills, empty it and clean the drip tray and stainless steel drip tray grid with a damp cloth. The stainless steel body of the machine can also be wiped down with a damp cloth to keep it looking its best.
- Brewing Boiler capacity: 0.58L (19.6oz)
- Steam / Hot water Boiler capacity: 1.7L (57oz)
- Boiler elements: 1400W
- Temperature control of boilers: Electronic control by PID sensors inside the boilers for precise temperature control.
- Certified commercial safety valve
- Dimensions: 12.2”W x 17.32”D x 16.14”H
- Weight: 29 kg (64lbs)
- Bodywork: All stainless steel (AISI 304)
- Brewing head: Commercial brewing head. Weight 4.05 kg (9 lb)
- Water Reservoir: 2.5L (84.5oz)
- Origin: Italy
- Full-size commercial one and two cup filter handles and baskets
- One blind filter
- Rocket Metal tamper
- Microfiber towel
- Group cleaning brush
- Full training guide and instructions(CD and manual)