Eureka Mignon Espresso Grinder in Chrome
It takes a special kind of grinder to condense convenience, performance, and price into an attractive package, but the Eureka Mignon is that grinder. At just 14” tall, you’ll have no trouble fitting this cutie under most cabinets to make short work of your daily grind. On the inside, a 260 watt motor and a set of 50mm flat steel burrs can produce grinds ranging from coarse for drip preparation to espresso fine. Dialing in your perfect grind is easy thanks to the easy to adjust knob that can be turned using your thumb and forefinger. With additional options for timed and manual grinding as well as an adjustable portafilter catch, the Eureka Mignon is well equipped to grind situation.
Dimensions: 14" H x 4.33" W x 6.5" D
Weight: 10.2 lbs
50mm Grinding Burrs
Coffee is ground by a set of 50mm flat steel burrs, ensuring even particle distribution for all brew methods.
Manual and Timed Dispensing
The grinder can easily be changed between manual and timed operation, thanks to a clever button located beneath the power switch. When in manual mode, grinding is controlled by a switch right below the dispensing spout. In timed mode the coffee can be set to dispense between 1 and 14 seconds.
Using the adjustment knob, you refine your grind with your thumb and forefinger. The stepless design allows for infinite play between burrs to ensure perfect extraction.
Adjustable Portafilter Catch
To accommodate portafilters of varying sizes, the catch fork can be adjusted to various heights beneath the spout. For easier grinding for drip devices, the catch can be removed entirely for greater clearance.
Hopper included, the Mignon still manages to pack its incredible performance into just 14 inches of grinder.
Easy to Maintain
The top burr is easily removed by taking out three screws that hold it in place. Because the bottom burr is used to adjust the grind, that means you can clean your burrs without affecting your grind settings.
High quality aluminum housing is both elegant and durable, resulting in a grinder that both looks and feels the part.