Learn how to properly time and adjust your extractions to get the best shots possible

Instructions for flushing the boiler.

Steps for fully draining the boiler.

Instructions for replacing the group head gasket and shower screen.

Steps for maintaining the group head.

Information on removing the machine's housing.

Regular wear items related to the group head.

There is a burning or melting plastic smell when the breaker trips.

The breaker trips Immediately upon powering on.

The breaker trips intermittently.

The breaker trips when the boiler is heating.

The breaker trips when the brew boiler is heating.

The breaker trips when the pump is running.

The breaker trips when the steam boiler is heating.

Troubleshooting for A1 error code.

Troubleshooting for A2 error code.

Troubleshooting for A3 error code.

Troubleshooting for A4 error code.

When trying to use the machine to brew, steam, or get hot water the PID is displaying an error code

There is no flow from the hot water wand and the steam pressure gauge reads zero

There is no flow from the steam wand and the steam pressure gauge reads zero

The group head leaks at all times.

The group head leaks when the machine is hot.

The group head leaks while pulling a shot.

The steam pressure gauge is leaking.

Maintenance instructions for the group head.

The pressure from the steam wand is too high

There is no pressure reading on the steam gauge when machine is fully heated.

The pressure reading on the steam gauge is too high

The pressure reading on the steam gauge is too low

The brew boiler temperature is too high.

The brew boiler temperature is too low.

The brew boiler is not heating.

The steam boiler temperature is too high.

The steam boiler temperature is too low.

The steam boiler is not heating.