Gaggia Anima: Clean the Internal Spout Chamber

Learn how to clean out the internal spout chamber of all Gaggia Anima models.

---

Gaggia Anima: How to Clean Internal Spout Chamber

1. Introduction (00:00)
2. Remove Trim (01:22)
3. Remove Display Cover (02:25)
4. Remove Spout Cover (04:08)
5. Remove Face Plate (04:55)
6. Remove Steam Arm (Base Model) (05:30)
7. Remove Face Plate (08:00)
8. Remove Ribbon Cable (08:35)
9. Remove Button/Screen Assembly (09:40)
10. Remove Top Cover (10:18)
11. Clean Internal Spout Chamber (15:36)
12. Diagnosing a Spout Chamber Clog (15:45)
13. Remove Spout Chamber (17:45)
14. Open Spout Chamber (19:20)
15. Assemble Spout Chamber (22:00)
16. Preventing Spout Clogs (22:37)
17. Install Spout Chamber (23:35)
18. Reassemble Housing (26:19)
19. Install Door (27:00)
20. Water Sensor Wiring (27:27)
21. Attach Waterline (28:25)
22. Grind Setting (29:05)
23. Install Hopper Sensor (29:50)
24. Install Top Cover (30:15)
25. Install Control Panel (34:10)
26. Install Face Plate (36:10)
27. Install Spout Components (37:10)
28. Install Display Cover (39:45)
29. Install Trim (41:30)
30. install Steam Arm (Base Model) (42:30)