Recommendations on where to set the flow control.

Step-by-step guide on installing the flow control.

Steps for maintaining and rebuilding the group head.

Steps for maintaining the group head.

Instructions for replacing the group head gasket and shower screen.

Information on backflushing your espresso machine

Regular wear items related to the machine’s valves.

Instructions for maintaining steam and water valves.

There is too much flow when trying to brew

When trying to use the machine to brew, steam, or get hot water the PID is displaying an error code

There is no or low flow from the hot water wand and the steam pressure gauge reads normally

There is flow from the steam wand initially, but it drops quickly

There is no or low flow from the steam wand and the steam pressure gauge reads normally

The group head leaks when the machine is hot.

The group head leaks at all times.

The group head leaks while pulling a shot.

The steam wand leaks when the machine is hot.

The steam wand leaks at all times.

The hot water wand leaks when the machine is hot.

The hot water wand leaks at all times.

The valve knob squeaks when moved.

There is a banging sound when the machine is heating.

There is a banging sound when the pump is running.

Maintenance instructions for the group head.

The group lever is hard to move.

The flow control does not move.

The flow control is hard to move.

The flow control keeps spinning without stopping.

Maintenance instructions for the steam valve.

The steam valve knob is hard to move.

The steam valve joystick is hard to move.

Maintenance instructions for the water valve.

The water valve knob is hard to move.

The water valve joystick is hard to move.

The breaker trips Immediately upon powering on.

The breaker trips when the pump is running.

The breaker trips when the boiler is heating.

The breaker trips intermittently.

There is a burning or melting plastic smell when the breaker trips.

The breaker trips when the brew boiler is heating.

The breaker trips when the steam boiler is heating.

The group head is not heating.

The group head temperature is too low.

The group head temperature is too high.

Troubleshooting for A1 error code.

Troubleshooting for A2 error code.

Troubleshooting for A3 error code.

Troubleshooting for A4 error code.

Troubleshooting for FIL error code.

Troubleshooting for Time out error code.

The pressure from the steam wand is too low

There is no pressure from the steam wand

The pressure from the steam wand is fluctuating