Step-by-step guide on installing the flow control.

Recommendations on where to set the flow control.

Learn about water connection attachments for an ECM Puristika espresso machine.

Information on backflushing your espresso machine

Instructions for replacing the group head gasket and shower screen.

Steps for maintaining the group head.

Steps for maintaining and rebuilding the group head.

Information on removing the machine's housing.

Information about programming the PID.

There is a burning or melting plastic smell when the breaker trips.

The breaker trips Immediately upon powering on.

The breaker trips intermittently.

The breaker trips when the boiler is heating.

The breaker trips when the brew boiler is heating.

The breaker trips when the pump is running.

The breaker trips when the steam boiler is heating.

Troubleshooting for A1 error code.

Troubleshooting for A2 error code.

Troubleshooting for A3 error code.

Troubleshooting for A4 error code.

Troubleshooting for FIL error code.

Troubleshooting for Time out error code.

When trying to use the machine to brew, steam, or get hot water the PID is displaying an error code

There is too much flow when trying to brew

The group head leaks at all times.

The group head leaks when the machine is hot.

The group head leaks while pulling a shot.

The flow control does not move.

The flow control is hard to move.

The flow control keeps spinning without stopping.

The group lever is hard to move.

Maintenance instructions for the group head.

Technical diagrams of the machine.

User manuals for the machine.

There is a banging sound when the machine is heating.

There is a banging sound when the pump is running.

The group head temperature is too high.

The group head temperature is too low.

The group head is not heating.