Learn how to properly time and adjust your extractions to get the best shots possible

Instructions for flushing the boiler.

Steps for fully draining the boiler.

Instructions for replacing the group head gasket and shower screen.

Steps for maintaining the group head.

Information on removing the machine's housing.

Regular wear items related to the group head.

Regular wear items related to the machine’s valves.

Instructions for maintaining steam and water valves.

Instructions for maintaining the steam valve.

The green light is on, but the PID is off.

The PID screen shows only a single dot.

The PID is off, and the machine is not heating.

Information about programming the PID.

Instructions for resetting the PID.

An internal tour of the electrical system of the machine

There is a burning or melting plastic smell when the breaker trips.

The breaker trips Immediately upon powering on.

The breaker trips intermittently.

The breaker trips when the boiler is heating.

The breaker trips when the brew boiler is heating.

The breaker trips when the pump is running.

The breaker trips when the steam boiler is heating.

Troubleshooting for A1 error code.

Troubleshooting for A2 error code.

Troubleshooting for FIL error code.

Technical diagrams of the machine.

Overview of internal machine components.

There is no flow from the group head and the pump is not making any noise

There is no flow from the grouphead and the pump sounds normal

There is no flow from the group head and the pump is sound different from normal

There is no flow from the hot water wand and the steam pressure gauge reads zero

There is no or low flow from the hot water wand and the steam pressure gauge reads normally

There is no flow from the steam wand and the steam pressure gauge reads zero

There is flow from the steam wand initially, but it drops quickly

There is no or low flow from the steam wand and the steam pressure gauge reads normally

A tour of the hydraulic circuit in the machine.

The group head leaks at all times.

The group head leaks when the machine is hot.

The group head leaks while pulling a shot.

The steam wand leaks when the machine is hot.

The hot water wand leaks when the machine is hot.

The steam pressure gauge is leaking.

There is a leak into the drip tray when the machine is heating up.

There is a leak into the drip tray when the machine is fully heated.

There is a leak into the drip tray when the pump is activated.

Maintenance instructions for the group head.

The steam valve knob is hard to move.

Maintenance instructions for the steam valve.

The water valve knob is hard to move.

Maintenance instructions for the water valve.

The pressure from the steam wand is fluctuating

There is no pressure from the steam wand

The pressure from the steam wand is too high

The pressure from the steam wand is too low

There is no pressure reading on the steam gauge when machine is fully heated.

The pressure reading on the steam gauge is too high

The pressure reading on the steam gauge is too low

When trying to brew the pump pressure is fluctuating

Information on how to make adjustments to the pump pressure

When trying to brew there is no pump pressure

When trying to brew the pump pressure is too high

When trying to brew the pump pressure is too low

The valve knob squeaks when moved.

The brew boiler temperature is too high.

The brew boiler temperature is too low.

The brew boiler is not heating.

The steam boiler temperature is too high.

The steam boiler temperature is too low.

The steam boiler is not heating.