Bezzera Strega Lever Espresso MachineBy Bezzera
Bezzera Strega Lever Espresso Machine By Bezzera
A unique offering from Bezzera, the Strega is a traditional, lever-operated heat-exchange machine with pressure profiling capabilities, which stands tall and proud when the lever is fully extended. Find out what it truly means to pull a shot on the Bezzera Strega.
Cannot compare more than 5 products.Go to Compare
Free shipping on all orders over $50
Includes a 1-Year Limited Warranty
Call us at 585‑924‑7170
Or chat with us!
Build Your Coffee Bar and Save a Bundle
Owning the Bezzera Strega
The Bezzera Strega is an old school lever-style espresso machine that pays homage to the very first espresso machine invented by the company’s founder Luigi Bezzera all the way back in 1901. Ever the innovators, though, Bezzera takes inspiration from a classic lever machine without getting stuck in the past. They’ve integrated both a hydraulic spring and vibration pump to ensure even pressure and offer control over pre-infusion. The Strega was intimidating to some of us, and it does take practice to get the process down, but, the adventurous among us found the Strega to be as fun as it is capable. As a heat exchange machine, it is capable of brewing and steaming simultaneously once you’ve got your shots down, and it can even be plumbed directly into a water line. Bezzera’s specially designed group head electronically heats up to make sure the brew water is never shocked by a cold component, though it will need to be flushed between uses, as the group can heat up a little too much. The Strega allows you to step back in time and experience what it’s truly like to pull a shot.
Using the Strega is tricky at first, but, once you get the hang of it, it’s totally worth it. One of the key benefits to brewing with the Strega is the unique way in which it controls both temperature and pressure. The high temperature of the copper boiler helps to properly heat the puck for a full extraction while the stored heat in the lever group allow for slightly lower finishing temperatures that prevent over-extraction. Similarly, the pressure produced by the machine trails off as well. The pump provides an initial 11 bar followed by the lever spring that starts around 9.5 bar and tapers to about 5.5 bar at the end of the shot. Remember to guide the lever up, because it will snap up quickly, and, we can tell you from experience, it hurts. For milk drinks, the Strega can produce roughly 45 seconds of steam time before needing to recover. The steam wand features a commercial style 4-hole tip that speeds up milk frothing and can require a bit of a learning curve for those who aren’t used to steaming so quickly.
Lever Operated Brewing
As opposed to modern push button or toggle brewing, the Strega is a throwback to espresso yesteryear with its traditional lever group. Assisted by a pump, the machine pre-infuses and brews by pulling down the lever and gradually releasing it. This style of machine originated the concept of pulling a shot.
Manual Pressure Profiling
Most machines deliver constant pressure over the course of a brew cycle, but the Strega’s lever and pump design allows you to modify the pressure manually while brewing the shot, simply by holding and releasing the lever. Regular use gradually tapers the pressure from 9.5 to 5.5 bars as the lever spring rises back to the top.
Electrically Heated Group Head
The Strega’s group head is electrically heated and designed for maximum temperature stability. The group head is heated by two dedicated heating elements and controlled by a thermostat. The dual elements help to provide even heating to the group head to aid in maintaining temperature stability.
Bezzera is one of the only espresso machine manufacturers to not only assemble its own machines in house, but design many of their own components and assemble those, too. So, rather than buying components externally and designing their machines around them, Bezzera thoughtfully designs each element, bringing them together into a beautiful whole.