Mahlkonig EK43 S Allround Commercial Coffee Grinder

Mahlkonig EK43 S Allround Shop Coffee Grinder

The Mahlkonig EK43 S is a more compact variant of the vaunted EK43 grinder. It has the same motor and grinding speeds with 98mm vertically mounted flat steel burrs. With the same all-purpose grinding range, particle distribution, and high speed performance of up to 21g/sec, the EK43 S is simply the grinder you choose when you need a shorter alternative to the full sized EK43.

Features and Benefits

The Mahlkonig EK43 S features huge 98 mm cast steel burrs spinning at an idle rate of 1760 RPM. Its impressive grinding speed of about 21 grams per second means that you can grind through a 12 oz retail bag of coffee in about 16 seconds. The shorter overall height of the EK43 S is better suited to operations where smaller retail bags will be most common, but the unchanged motor and burr set mean that this grinder will have no trouble keeping up with any frequency of grinding you throw at it.

But what makes baristas all over the world choose this grinder is the particle consistency afforded by the Mahlkonig EK43 S. Fines are a byproduct of grinding coffee that are both the enemy and friend of baristas, but on the EK43 S, even the fines are pretty similar to the rest of the grinds. This allows more focused flavors and more sweetness, unlocked by more control.

Using the EK43 S is simple. Just attach a receptacle like a shaker or coffee bag onto the clip, add beans to the hopper, press start, and open the hopper gate. Once there’s no more coffee to be ground, press the stop button and flick the knocker to get any remaining grounds out of the chute.

Mahlkonig also makes the popular Turkish grinding burrs for those who want greater range and accuracy for espresso preparation in addition to special spice grinding burrs, if that’s what you need.

Certifications/Conforms To:

CE, CB, ETL Safety, ETL Sanitation, IEC/EN 60335-1, IEC/EN 60335-2-64, ANSI/UL 763 and CSA-C22.2 No. 195

Why You Should Get It

Simply put, the EK43 S is a comparatively shorter EK43 that saves you 5.8" of height. On bar it will be easier for shorter baristas to refill and operate and won't obscure your eyeline to customers as much. Otherwise it's got the same legendary performance as the EK43, offering some of the best grinding speeds and particle consistency available on the market allowing you to serve the best possible coffee to your customers.