USA
Support Articles
Profitec Pro 600: Adjust Brew Pressure
Learn how to adjust brew pressure on the Profitec Pro 600 espresso machine. Profitec Pro 600 How to Adjust Brew Pressure ||||support-video~~VgYwqr84Fg8||||
Profitec Pro 700: Internal Tour and Component Identification
A guided tour of the Profitec Pro 700’s internals: water supply options (reservoir vs. plumb-in), pump and pressure adjustment, valve tree and safety components, brew/steam boilers and sensors, electronics (PID,...
Profitec Pro 600: Remove Housing, Install Housing and Install Custom Sid...
Learn how to remove and install the outer housing panels of the Profitec Pro 600 espresso machine, as well as how to install custom side panels. Profitec Pro 600: Housing...
Profitec Pro 600: Internal Tour and Component Identification
Learn the functions of components inside the Profitec Pro 600 espresso machine, a semi-automatic dual boiler machine with PID temperature control. Profitec Pro 600 Espresso Machine: Internal Tour & Component...
Profitec Pro 500 PID: Flow Issues
Learn how to diagnose and fix flow issues on the Profitec Pro 500 PID espresso machine. Profitec Pro 500 PID How to Diagnose and Fix Flow Issues ||||support-video~~Rqtl55_8LgA||||
Profitec Pro 500 PID: Adjust Brew Pressure
Learn how to adjust brew pressure on the Profitec Pro 500 PID espresso machine. Video includes information on pressure range, OPV, and why you might see slight variations in pressure....
Profitec Pro 500 PID: Check and Reset High-Limit Switches
If your machine is not heating up, resetting the high-limit switches may solve the problem. The high-limit switches can trip if a machine is turned on and there's not enough...
Crem ONE INFUSER: Initial Setup and First Use
Watch the video below to learn all about the Crem ONE INFUSER, including what comes in the box, how to set up the machine initially, how to navigate the menus...
Profitec Pro 500 PID: Not Staying Hot or Not Getting Hot Enough
Learn what to do when a Profitec Pro 500 PID espresso machine is heating up, but not maintaining temperature, or only reaching partial temperature setting. When this occurs, there are...
Profitec Pro 500 PID: Diagnose and Replace PID Relay
Learn how to diagnose and replace a PID relay on a Profitec Pro 500 PID espresso machine. Profitec Pro 500: PID Relay Replacement ||||support-video~~SmLeio36vMs|||| Â Related Parts: Static Relay Â
Profitec Pro 500 PID: Drain the Boiler
Learn how to drain the boiler of the Profitec Pro 500 PID espresso machine. Video demonstrates draining techniques for both hot and cold machines. Drain the boiler for long-term storage,...
Profitec Pro 500 PID: Remove and Install Housing
Learn how to remove and install the housing of the Profitec Pro 500 PID espresso machine. Profitec Pro 500 PID How to Remove and Install the Housing ||||support-video~~8b9rHDZagys||||