Profitec Drive
The Profitec Drive is a sophisticated German Dual Boiler Espresso Machine with precise temperature control, advanced brewing features, and easy to customize to your preferred look.
Categories
-
Startup And Use
- Flow Control
-
Regular Maintenance
- Group Head
- Regular Wear Items
- Steam
-
Flow
- Error Codes
- Hot Water
- Steam
- Too Much Flow
-
Leaks
- From Group
- From Steam Wand
- From Water Wand
-
Sounds
- Banging
- Popping
- Squeaks
-
Mechanical
- Flow Control
- Group Head
- Steam Valve
- Water Valve
-
Electrical
- Light Out
- Pid
- Tripping Breaker
-
Temperature
- Brew Boiler
- Group
- Steam Boiler
-
Pressure
- From Steam Wand
- On Pump Gauge
- On Steam Gauge
- Pump
-
Error Codes
- Error Codes
-
Parts
- Diagrams And Manuals
Flow Control
-
How To Install
Step-by-step guide on installing the flow control.
-
Where To Set
Recommendations on where to set the flow control.
Group Head
-
Backflushing
Information on backflushing your espresso machine
-
Gasket And Shower Screen
Instructions for replacing the group head gasket and shower screen.
-
Maintenance
Steps for maintaining the group head.
-
Maintenance And Rebuild
Steps for maintaining and rebuilding the group head.
Hot Water
-
No Pressure On Gauge
There is no flow from the hot water wand and the steam pressure gauge reads zero
-
Pressure Drops Quickly
There is flow from the hot water wand initially, but it drops quickly
-
Pressure On Gauge But No Water
There is no or low flow from the hot water wand and the steam pressure gauge reads normally
Steam
-
No Pressure On Gauge
There is no flow from the steam wand and the steam pressure gauge reads zero
-
Pressure Drops Quickly
There is flow from the steam wand initially, but it drops quickly
-
Pressure On Gauge But No Steam
There is no or low flow from the steam wand and the steam pressure gauge reads normally
From Group
-
Always
The group head leaks at all times.
-
When Hot
The group head leaks when the machine is hot.
-
While Brewing
The group head leaks while pulling a shot.
Banging
-
Under High Pressure
There is a banging sound when the machine is under high pressure.
-
When Heating
There is a banging sound when the machine is heating.
-
When Pump Is Running
There is a banging sound when the pump is running.
Squeaks
-
From Group Lever
The group lever squeaks when moved.
-
From Valve Joystick
The valve joystick squeaks when moved.
Flow Control
-
Doesn't Move
The flow control does not move.
-
Hard To Move
The flow control is hard to move.
-
Just Keeps Spinning
The flow control keeps spinning without stopping.
Group Head
-
Lever Hard To Move
The group lever is hard to move.
-
Maintenance
Maintenance instructions for the group head.
Steam Valve
-
Joystick Hard To Move
The steam valve joystick is hard to move.
-
Maintenance
Maintenance instructions for the steam valve.
Water Valve
-
Joystick Hard To Move
The water valve joystick is hard to move.
-
Maintenance
Maintenance instructions for the water valve.
Tripping Breaker
-
Burning Or Melting Plastic
There is a burning or melting plastic smell when the breaker trips.
-
Immediately
The breaker trips Immediately upon powering on.
-
Intermittently
The breaker trips intermittently.
-
When Boiler Heats
The breaker trips when the boiler is heating.
-
When Brew Boiler Heats
The breaker trips when the brew boiler is heating.
-
When Pump Runs
The breaker trips when the pump is running.
-
When Steam Boiler Heats
The breaker trips when the steam boiler is heating.
From Steam Wand
-
Fluctuating
The pressure from the steam wand is fluctuating
-
None
There is no pressure from the steam wand
-
Too Low
The pressure from the steam wand is too low
Pump
-
How To Adjust
Information on how to make adjustments to the pump pressure
-
Too High
When trying to brew the pump pressure is too high
-
Too Low
When trying to brew the pump pressure is too low