Recommendations on where to set the flow control.

Step-by-step guide on installing the flow control.

A list of included components and accessories in the box.

Instructions for initial setup and first use of the machine.

Instructions for connecting the machine to a plumbed water source.

Steps for maintaining and rebuilding the group head.

Steps for maintaining the group head.

Instructions for replacing the group head gasket and shower screen.

Information on backflushing your espresso machine

Regular wear items related to the machine’s valves.

Instructions for maintaining steam and water valves.

Instructions for flushing the boiler.

Steps for fully draining the boiler.

Information on removing the machine's housing.

There is too much flow when trying to brew

There is no flow from the steam wand and the steam pressure gauge reads zero

There is flow from the steam wand initially, but it drops quickly

There is no or low flow from the steam wand and the steam pressure gauge reads normally

When trying to use the machine to brew, steam, or get hot water the PID is displaying an error code

There is no or low flow from the hot water wand and the steam pressure gauge reads normally

There is no flow from the group head and the pump is not making any noise

There is no flow from the group head and the pump is sound different from normal

There is no flow from the grouphead and the pump sounds normal

The group head leaks when the machine is hot.

The group head leaks at all times.

The group head leaks while pulling a shot.

The steam wand leaks when the machine is hot.

The steam wand leaks at all times.

The hot water wand leaks when the machine is hot.

The hot water wand leaks at all times.

The valve knob squeaks when moved.

There is a banging sound when the machine is heating.

There is a banging sound when the pump is running.

There is a banging sound when the machine is under high pressure.

There is an internal popping sound inside the machine.

There is an external popping sound coming from the machine.

The pump is louder than normal during operation.

The pump is quieter than normal during operation.

The pump sound is inconsistent or fluctuates.

Maintenance instructions for the group head.

The group lever is hard to move.

The flow control does not move.

The flow control is hard to move.

The flow control keeps spinning without stopping.

Maintenance instructions for the steam valve.

The steam valve knob is hard to move.

The steam valve joystick is hard to move.

Maintenance instructions for the water valve.

The water valve knob is hard to move.

The water valve joystick is hard to move.

The group head is not heating.

The group head temperature is too low.

The brew boiler is not heating.

The brew boiler temperature is too low.

The brew boiler temperature is too high.

The steam boiler is not heating.

The steam boiler temperature is too low.

The steam boiler temperature is too high.

Information about programming the PID.

The PID is off, and the machine is not heating.

Instructions for resetting the PID.

The orange indicator light is off.

The green light is on, but the PID is off.

The breaker trips Immediately upon powering on.

The breaker trips when the pump is running.

The breaker trips when the brew boiler is heating.

The breaker trips when the steam boiler is heating.

The breaker trips intermittently.

Troubleshooting for FIL error code.

Troubleshooting for Time out error code.

Troubleshooting for A1 error code.

Troubleshooting for A2 error code.

Troubleshooting for A3 error code.

Troubleshooting for A4 error code.

When trying to brew the pump pressure is too low

When trying to brew the pump pressure is too high

Information on how to make adjustments to the pump pressure

When trying to brew there is no pump pressure

When trying to brew the pump pressure is fluctuating

Information on how to make adjustments to the pump pressure

The pressure reading on the brew gauge is too low

The pressure reading on the brew gauge is fluctuating.

The pressure reading on the steam gauge is too low

The pressure from the steam wand is too low

There is no pressure from the steam wand

The pressure from the steam wand is fluctuating

User manuals for the machine.

Technical diagrams of the machine.

Overview of internal machine components.