Support Articles

This article outlines how to force prime a Gaggia Cadorna, Velasca, or Brera espresso machine when it cannot automatically pull water during startup. This issue—often displayed as “Filling Water Circuit,”...

This guide explains the location and function of the Gaggia Brera’s key microswitches and sensors, including the service door switch, dreg drawer (dump box) switch, brew unit present switch (coin-slot...

The Gaggia Brera does not have an option for a hard reset (or factory reset), but there is a test mode. The test mode will allow you to manually test...

Whole Latte Love refurbishes customer-returned espresso machines by carefully inspecting them, separating and cleaning accessories, and performing a full functional test process to confirm each machine operates like new. This...

If you find that the knob for your steam wand is spinning but is not turning the steam on (or off if the steam won’t stop), it may be that...

If adjusting your machine’s rotary pump doesn’t change the brew pressure, the issue is usually simple to resolve. This guide gives a quick overview of what’s happening and what to...

If you have coffee shooting out from the spouts on your portafilter, don't stress: it's an easy fix. The most likely cause is that the pressurized basket is being used...

Your machine's pump is set to work at a set pressure. As such, if there is any aspect of the coffee that impedes water flow more so than the machine...

A loud pump can potentially be a sign of a pump that is on its last legs. With an older machine, it likely needs to be replaced. Before deciding if...

Get to know your new Gaggia Classic Pro machine. This information is good for any version of the machine including the Classic, 2019 Classic Pro, Classic EVO Pro, or Classic...

The initial and shutdown rinse cycles are meant for the internal parts of the machine, so some portion will always go directly from the brew unit area to the drip...

The Gaggia Brera has a firmware update to address a potentially problematic No Beans Error as well as adding in an extra step in the brew unit's rinse process. If...